Registration To The Database; Configuring The Network; Configuring The Ipv4 Address - Sony ODS-L30M Manual De Instrucciones

Registration to the Database

After inserting a cartridge and closing the I/E station,
information about each cartridge is automatically
registered in the unit's database. The database registration
may take some time to complete when inserting multiple
cartridges.
When registration to the database is complete, the I/E
STATION indicator will light green or orange.

Configuring the Network

After configuring the IPv4 address in the display on the
front panel of the unit, connect the unit to the computer on
which the Web browser is installed, and configure the
unit's settings and check its status via the Library
Maintenance Web UI.

Configuring the IPv4 Address

The IP address, subnet mask, default gateway settings are
required. Network 1 is configured for DHCP by factory
default. Network 2 is configured with the following
settings.
IP address: 192.168.1.10
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
Use the display and the buttons on the front panel of the
unit to configure the network settings.
1
Press the MENU button.
The menu appears in the display.
2
Use the J and j buttons to select [Setup], and press
the ENTER button.
The [Setup] screen appears.
3
Use the J and j buttons to select [Network], and
press the ENTER button.
The [Network] screen appears.
4
Use the J and j buttons to select [Network 1], and
press the ENTER button.
The [Network1] screen appears.
47
Configuring the Network