Charging The Robot - Qilive Q.5147 Manual Del Usuario

4.4

CHARGING THE ROBOT

EN
When the product is initially purchased, the battery might be discharged. Charge the
robotic vacuum cleaner manually first.
1. Press and hold the ON/OFF power button
2. When the robot is on, the ON/OFF light indicator illuminates constantly in green
colour.
Note: When the robot is fully charged, both ON/OFF light indicator
indicator illuminate permanently in green colour.
Notes: When the robotic vacuum cleaner cannot be automatically charged, check the
following:
• Check whether there are any foreign substances on the contact pins and wipe the
contact pins both on the robot and the charging station with a dry cloth.
• Check whether there are objects near the charger that are strong reflectors.
• Re-plug the power of the charging station.
• When separating the robot vacuum cleaner from the charging station, it will discharge
naturally.
Note: When leaving home unattended for a long period of time due to a business trip,
travelling etc., turn off the robot vacuum cleaner and unplug the power of the charger.
4.4.1 AUTOMATIC RECHARGING
At the end of a cleaning program the robot
automatically returns to the charging station.
Notes:
• If the robot has not started the cleaning
program from the charging station or if the
charging station is inaccessible (it is not in the
same room), the robot will return to its starting
location and end the cleaning program. In this
case, place the robot vacuum cleaner manually on the charging station to recharge.
• If the battery is running low during the cleaning program, the robot vacuum cleaner
will automatically return to the charging station to recharge and will resume the
cleaning program after the battery level reaches the required level.
4.4.2 MANUAL RECHARGING
3. Connect the device to the charging station
manually. After aligning the contact pins of the
robot vacuum cleaner with the contact pin of the
charging station, you will hear 2 bell sounds. The
recharging light
green colour.
Notes:
• Keep the front side of the robot at a distance
from the charging station, to ensure that the
robot charging contact pins are perfectly aligned
with the charging contact pins of the charging
station.
• After the robot vacuum cleaner is fully charged, the recharging light indicator lights
up permanently in green colour.
• In order to ensure the normal working hours of the device, fully charge it before use.
4. Press the charging button
station.
indicator flashes constantly in
on the remote control to send the robot to the charging
14
on the top of the robot vacuum cleaner.
and recharging light
1 cm