Grundfos RSI Serie Instrucciones De Instalación Y Funcionamiento página 32

Fault
Fault
Fault name
code
ID
1315
111 Temperature fault 1
1316
1317
112 Temperature fault 2
1318
32
Possible cause
At least one of the selected tempera-
ture input signals has reached the
alarm limit.
At least one of the selected tempera-
ture input signals has reached the
fault limit.
At least one of the selected tempera-
ture input signals has reached the
fault limit.
At least one of the selected tempera-
ture input signals has reached the
fault limit.
Remedy
Find the cause of the tempera-
ture raise.
Check the temperature sensor
and the connections.
Check that the temperature input
is hard-wired if a sensor is not
connected.
For further information, see the
option board manual.