Tabla De Contenido; General Information; Hazard Statements; Notes - Grundfos RSI Serie Instrucciones De Instalación Y Funcionamiento

English (GB) Installation and operating instructions
Original installation and operating instructions
Table of contents
1. General information . . . . . . . . . . . . . 4
1.1 Hazard statements . . . . . . . . . . . . . . 4
1.2 Notes . . . . . . . . . . . . . . . . . . . . . 4
2. Receiving the product. . . . . . . . . . . . 5
3. Technical data . . . . . . . . . . . . . . . . 6
3.1 Product range . . . . . . . . . . . . . . . . . 6
3.2 Technical data. . . . . . . . . . . . . . . . . 13
4. Installing the product . . . . . . . . . . . . 17
4.1 Installation example. . . . . . . . . . . . . . 18
4.2 Electrical connection . . . . . . . . . . . . . 19
5. Operation . . . . . . . . . . . . . . . . . . . 23
5.1 Operating panel . . . . . . . . . . . . . . . . 24
5.2 Startup wizard parameter description . . . . 25
6. Fault finding the product . . . . . . . . . . 26
6.1 Fault codes and remedies . . . . . . . . . . 26
6.2 Resetting fault codes . . . . . . . . . . . . . 33
6.3 Fault history . . . . . . . . . . . . . . . . . . 33
6.4 Reset to factory default . . . . . . . . . . . . 33
7. Servicing the product . . . . . . . . . . . . 33
7.1 Routine inspection . . . . . . . . . . . . . . 33
7.2 Inspection and replacement of wear parts . . 35
7.3 Storage and warranty . . . . . . . . . . . . . 35
8. Disposing of the product . . . . . . . . . . 35

1. General information

Read this document before you install the
product. Installation and operation must
comply with local regulations and accepted
codes of good practice.

1.1 Hazard statements

The symbols and hazard statements below may
appear in Grundfos installation and operating
instructions, safety instructions and service
instructions.
DANGER
Indicates a hazardous situation which, if
not avoided, will result in death or serious
personal injury.
WARNING
Indicates a hazardous situation which, if
not avoided, could result in death or seri-
ous personal injury.
4
CAUTION
Indicates a hazardous situation which, if
not avoided, could result in minor or mod-
erate personal injury.
The hazard statements are structured in the following
way:
SIGNAL WORD
Description of the hazard
Consequence of ignoring the warning
• Action to avoid the hazard.

1.2 Notes

The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Observe these instructions for explosion-
proof products.
A blue or grey circle with a white graphical
symbol indicates that an action must be
taken.
A red or grey circle with a diagonal bar,
possibly with a black graphical symbol, in-
dicates that an action must not be taken or
must be stopped.
If these instructions are not observed, it
may result in malfunction or damage to the
equipment.
Tips and advice that make the work easier.