Programming And Configuration; Information Display - gefran 40T 48 Manual De Instrucciones

LEVEL 1 DISPLAY
PU
Process variable
o. 1
Alarm setpoint output 1
o. 2
Alarm setpoint output 2 (*)
o. 3
Alarm setpoint output 3 (*)
o. 4
Alarm setpoint output 4 (*)
(*) For deviation alarms the setpoint range is -
999 ... 999
If the Inc, Dec, F keys are not pressed within
15 sec., the display returns to the P.V. value
Keep the F key pressed to browse the menus.
Release the F key to enter the displayed menu.
Press the F key to access the parameters.
Keep the F key pressed to exit any menu at any time

• Information display

1F
ud
(o
xd
OUTPUT 2 / OUTPUT 1
0 = Absent / Absent
1 = Relay / Relay
2 = Logic / Relay
3 = Triac / Relay
Example:
5 • PROGRAMMING and CONFIGURATION
NO
Conf = ON
Information display
Software version
Device code
HD configuration
INPUT / OUTPUT 3
0 = Absent
1 = Relay
2 = Logic
4 = Analogi
6 = In Digital
1 1 1 = R + R + RS 485
Pressed for approx. 2 sec.
1F Information display
SW
YES
(F
Hysteresis parameters
sr
Serial communication
1n
Inputs setting
0v
Outputs setting
• Hysteresis parameters
(F
x. 1
x. 2
x. 3
x. 4
• IF Display
DIGITAL COMMUNICATION / OUT4
0 = Absent
1 = RS 485
2 = Relay
12
pA
Password
NO
PA = 99
YES
Pr
Protection code
ln
Custom linearization
u(.
User calibration
Hysteresis parameters
Hysteresis for alarm output 1
Hysteresis for alarm output 2
Hysteresis for alarm output 3
Hysteresis for alarm output 4
1F
ud
(o
Device code
xd
configuration
-999 ... +999
scale points
-999 ... +999
scale points
-999 ... +999
scale points
-999 ... +999
scale points
Information
display
Software
version
HD