About The Pedometer Watch; Using The Pedometer; Getting Started; Turn On Watch (First-Time Use Only) - Oregon Scientific PE603 Manual De Usuario

5. : Indicates morning or afternoon when clock is set
OR
in 12HR mode
6. : Smart indicator; Lower values
7. : Indicates battery is running low
8. : Alarm is set; will fl ash when activated
9. : Smart indicator; Increase values
10. : Appears in pedometer mode (main mode)
: Appears when viewing calories burned
: Indicates pedometer memory from 1-7 days
before
13. : Weight unit
14. : Smart indicator when in setting mode

ABOUT THE PEDOMETER WATCH

The pedometer watch is able to measure steps taken
when walking or running. It begins counting after the fi rst
16 steps are taken consecutively.

USING THE PEDOMETER

In order to record accurate readings the following
guidelines should be adhered:
The pedometer watch should be worn on the left wrist
•
only.
This pedometer measures steps for both
•
walking and running.
Sudden movements performed
continuously, such as playing the piano or typing, may
result in false readings. To limit these false readings,
you should keep your left arm steady for approximately
2-3 seconds.

GETTING STARTED

TURN ON WATCH (FIRST-TIME USE ONLY)

Press and hold any key for 2 seconds to activate the
LCD display.
GETTING STARTED
The watch uses a 1 x CR2032 lithium battery, which has
already been installed. See below for battery warnings.
LOW BATTERY ICON
To replace battery:
3
DESCRIPTION
The watch battery is low.