Select Measurement Unit; Select Sensor Channel; Minimum / Maximum Records; Temperature And Humidity Trend - Oregon Scientific BAR989HG Manual De Usuario

SELECT MEASUREMENT UNIT

° °
Slide the C / F switch (inside the clock battery
compartment), to the setting you want.

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1-5.
The house icon shows the selected remote sensor.
• To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will
be displayed for 3 seconds.
• To end auto-scan, press CHANNEL or MEMORY
with the Temperature / Humidity Area selected.
NOTE If you select a sensor that collects only
temperature data, the humidity will not be shown.

MINIMUM / MAXIMUM RECORDS

• Press MEMORY repeatedly to view current,
maximum and minimum records for the selected
sensor.
• To clear the records, press and hold MEMORY
for 2 seconds. A beep will sound to confirm that
the memory has been cleared.
BAR989HG_M_EN_op.p65

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the temperature and
humidity readings.

COMFORT ZONE

The Comfort Zone indicates how comfortable the climate
is, based on current temperature and humidity
measurements.
NOTE
when the current measurement is displayed.
22
22
TREND RISING
TEMPERATURE
HUMIDITY
ZONE TEMPERATURE
WET Any
20-25°C
COM
(68-77°F)
DRY Any
This information is shown in the Humidity Area
2005.9.17, 10:29 AM
STEADY FALLING
HUMIDITY
>70%
40-70%
<40%