Weather Forecast; Temperature; Select Temperature Unit; Select Channel Number - Oregon Scientific BAR626 Manual De Uso

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius with 70 to 75
percent accuracy. The weather forecast is always
displayed.
SUNNY PARTLY
CLOUDY

TEMPERATURE

This product can display current, minimum, and
maximum temperature information collected by the re-
mote sensors and main (indoor) unit.
Outdoor data is collected and displayed every 40
seconds. Indoor data is collected and displayed every
10 seconds.

SELECT TEMPERATURE UNIT

° °
Slide the C / F switch into the desired location. The
switch is located in the main unit battery compartment.
The setting for the main unit overrides the remote
sensor setting.

SELECT CHANNEL NUMBER

Press CHANNEL to switch between sensors 1-3.
The icon shows the selected sensor.
KINETIC-WAVE
ICON
Designated Indoor Remote
Display Display Display
Channel 1
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEM.
NOTE For more information on the sensor see
"Remote Sensor THN122N" Section.
CLOUDY RAINY
Remote Remote
Display Display
Channel 2 Channel 3

MINIMUM / MAXIMUM RECORDS

The MEM button is located in the main unit battery
compartment. Press MEM to toggle between current,
maximum (MAX) and minimum (MIN) records. To clear
the records, press and hold MEM for 2 seconds. A beep
will sound to confirm that the memory has been cleared.

MOON PHASE

The Calendar must be set for this feature to work, see
"Set Clock" section.
¥ Press or to view the moon phase for the next
or previous day.
¥ Press and hold
years (2001 to 2099).
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent

RESET SYSTEM

The RESET button is located in the main unit battery
compartment. Press RESET when you change the
batteries and whenever performance is not behaving
as expected (for example, unable to establish radio
frequency link with remote sensor or clock).

SAFETY AND CARE

Clean the product with a slightly damp cloth and
alcohol-free, mild detergent. Avoid dropping the
product or placing it in a high-traffic location.
7
or to scan quickly through the