Theme Settings; Audio Settings - Pioneer DMH-100BT Manual De Operación

* With some pictures, you cannot adjust [Hue] and [Color].
NOTES
• The adjustments of [Brightness], [Contrast], and [Dimmer] are stored separately when your vehicle's
headlights are off (daytime) and on (nighttime).
• [Brightness] and [Contrast] are switched automatically depending on the setting of [Dimmer
Settings].
• [Dimmer] can be changed the setting or the time to switch it to on or off (page 16).
• The picture adjustment may not be available with some rear view cameras.
• The setting contents can be memorized separately.

Theme settings

Menu Item Description
[Background] Select the wall paper from the preset items in this product.
[Home] [AV] The wall paper can be set from selections for the top menu
screen and AV operation screen.
Preset Display Select the desired preset background display.
(off ) Hides the background display.
[Theme]* Select the theme color.
* You can preview the top menu screen or the AV operation screen by touching [Home] or [AV]
respectively.

Audio settings

The menu items vary according to the source. Some of the menu items become
unavailable when the volume is set to mute.
Menu Item Description
[Graphic EQ] Select or customize the equalizer curve.
[Super Bass] [Powerful] Select a curve that you want to use as the basis of customizing
[Natural] [Vocal] [Flat] then touch the frequency that you want to adjust.
[Custom1] [Custom2]
TIPS
• If you make adjustments when a curve [Super Bass], [Powerful],
[Natural], [Vocal], or [Flat] is selected, the equalizer curve settings
will be changed to [Custom1] mandatorily.
• If you make adjustments when the [Custom2] curve is selected
for example, the [Custom2] curve will be updated.
• [Custom1] and [Custom2] curves can be created common to all sources.
[Preout] Select the rear speaker output.
[Rear] [Subwoofer] This function is available when the source is off.
Menu Item Description
[Fader/Balance] Touch
[Front] and [Rear] to [0] when using a dual speaker system.
Touch
TIP
You can also set the value by dragging the point on the displayed table.
NOTE
Only the fader can be adjusted when [Rear] is selected as the
speaker mode.
[Source Level Adjuster] Adjust the volume level of each source to prevent radical
[-4] to [+4] changes in volume when switching between sources other
than FM.
Touch
comparing the FM tuner volume level with the level of the
source.
TIP
If you directly touch the area where the cursor can be moved, the
SLA (source level adjustment) setting will be changed to the value
of the touched point.
NOTES
• Settings are based on the FM tuner volume level, which remains
unchanged.
• This function is not available when the FM tuner is selected as
the AV source.
[Subwoofer] Select enable or disable subwoofer output from this
[On] [Off] product.
[Speaker Level] Adjust the speaker output level of the listening position.
1
[Front Left] [Front Right] Touch
[Rear Left] [Rear Right] select the output speaker.
2
[Subwoofer] [Listening Touch
Position] level.
NOTE
For rear speaker, this function is available only when [Rear] is
selected in [Preout].
[Subwoofer Settings] Select the subwoofer phase and LPF cut-off frequency
(page 18).
[Listening Position] Select a listening position that you want to make as the
[Off] [Front Left] [Front center of sound effects.
Right] [Front] [All]
[BASS Boost] Adjust the bass boost level.
[0] to [+6]
or to adjust the front/rear speaker balance. Set
or to adjust the left/right speaker balance.
or to adjust the source volume after
or to select the listening position then
or to adjust the selected speaker output
17
En