Remote Control; Starting Up The Unit; Using The Touch Panel - Pioneer DMH-100BT Manual De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

– Some of the settings and recorded contents will not be reset.
• The microprocessor must be reset under the following conditions:
– Prior to using this product for the first time after installation.
– If this product fails to operate properly.
– If there appears to be problems with the operation of the system.
1
Turn the ignition switch OFF.
2
Press RESET with a pen tip or other pointed tools.
Settings and recorded contents are reset to the factory settings.

Remote control

The remote control is sold separately. For details concerning operations, see the remote
control manual.

Starting up the unit

1
Start the engine to boot up the system.
The [Select Program Language] screen appears.
NOTE
From the second time on, the screen shown will differ depending on the previous conditions.
2
Touch the language.
3
Touch
.
The top menu screen appears.

Using the touch panel

You can operate this product by touching the keys on the screen directly with your
fingers.
NOTE
To protect the LCD screen from damage, be sure to touch the screen only with your finger gently.
Common touch panel keys
Switches between playback and pause.
6
En
Skips files/tracks/chapters forward or backward.
Performs fast reverse or fast forward.
Touch again to change the playback speed.
Stops playback.
Text
When all characters are not displayed, the rests are automatically scrolled on
information
the display. The characters are displayed by touching the text information.
NOTE
This function is available only when you stop your vehicle in a safe place and apply
the parking brake.
Returns to the previous screen.
Close the screen.
Operating list screens
Touching an item on the list allows you to narrow down the options and
proceed to the next operation.
Appears when all characters are not displayed on the display area.
If you touch the key, the rests are scrolled for display.
NOTE
This function is available only when you stop your vehicle in a safe place and apply
the parking brake.
Appears when items cannot be displayed on a single page.
Touch
or
to view any hidden items.
Operating the time bar
You can change the playback point by dragging the key.
NOTE
The time bar function may vary depending on the activating source.

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido