Electrolux ENB43399W Manual De Instrucciones página 13

5. Remove the lower door.
6. Remove the ventilation grille which is
fixed by two screws.
7. Carefully put the appliance to its rear
side, totally unscrew the adjustable foot
and screw it in the opposite side.
8. Remove the bottom hinge by unscrew-
ing its fixing screws.
9. Using a 12 mm spanner, unscrew the
hinge pin and reassemble it on the op-
posite side of the hinge.
10. Install the lower hinge in the opposite
side, using the screws previously re-
moved.
11. Carefully put the appliance in its working
position and adjust the level of the appli-
ance by screwing / unscrewing the ad-
justable feet at the bottom of the cabinet
using your fingers or a tool.
H
12. Slide the hole cover out of the ventilation
grille by pushing it in the direction of the
arrow and reassemble it on the opposite
side.
13. Install the ventilation grille, fixing the
screws.
14. Install the lower door.
15. Install the middle hinge (H) in the oppo-
site side.
16. Install the upper door.
17. In your documentation bag you will find
the upper hinge necessary to make the
reversibility. Put the hinge in position and
screw it.
18. Remove the handle cover making pres-
sure and using a screwdriver. Remove
the handles and fix them on the opposite
side. Put the plastic lids on the holes that
were situated where the handles are
presently. Install the handle cover.
Do a final check to make sure that:
electrolux 13