Publicidad
Idiomas disponibles
Idiomas disponibles
How to use the comb attachment:
1. Please aim the comb feet at column nails of body sides and make 90°angle with the blade
underside,then assemble it.
See picture ( in the direction indicated by the arrow)
2. Pull the comb feet out of the body for uninstall, please.
See picture ( in the direction indicated by the arrow)
Maintenance of the blades:
1. Push the blade out of the machine, then use the cleaning brush to wipe off the scraps among
the blade. Lubricating the space between the stationary and the moving blades with 2 or 3 drops
of oil .
2. Clean the blade after using every time in time.
When charging
Please don't charge if the temperature is lower than 0°C or higher than 40°C.
Please don't charge if it is nearby the sunlight perpendicular incidence or the heat source
radiates.
The standard charging time is 1.5 hours. In order to avoid mangling the batteries, please don't
extend the charging time.
Cautions
Cleaning the housing using only a cloth slightly dampended water or a mild soap solution.
Never use a caustic solution.
Never submerge the clipper in water.
Keep away from the children.
This clipper may become warm during operating and/or charging, this is normal.
When using, don't hold the power soft line, in order to prevent possible harm.
Never tamper with moving parts.
- 7 -
Publicidad
