Parts Identification - Sinbo SHC 4356 Manual De Uso

ENGLISH
SINBO SHC 4356 RECHARGEABLE HAIR CLIPPER
OPERATING INSTRUCTIONS
Before using, please read the instructions carefully.
NOTES BEFORE USING
Before using at the first time, please charge 1.5 hours fully to activate the inside rechargeable
batteries.
Only one copy of this Book Instruction, please pay attention to keep it carefully in order to use
whenever.

PARTS IDENTIFICATION:

1. Switch button, 2. Transparent window (display), 3. Blade, 4. Comb attachment, 5. Adaptor
How to use:
This hair clipper can be used in both cord and cordless.
1. Put the adaptor connected with the jack of the battery pack which lies at the bottom of the
machine, then put the adaptor pins connected with power pay attention to the voltage, please
coincide with the voltage on the nameplate of adaptor, the full charging time is 1.5 hours. It can
also be charged with charging stand connected with the bottom of machine. When full charged,
it can be used continuously for more than 45 minutes. The Words showing in the transparent
window is the leaving capacity at present. For example, Light with 40 means 40% leaving capacity
of battery. Light with LOW means not enough battery, needing charging. 100% means full battery.
2. Press the switch button slightly before using. If not enough battery, please charge with
adaptor for using.
How to install and uninstall the blade:
1. Please aim blade at slot for install, then press the full parts entad until hearing the "KA"
sound.
See picture (in the direction indicated by the arrow)
2. Handing the hair clipper in obverse, then pull the blade slightly out of the body.
See picture (in the direction indicated by the arrow)
- 6 -