Installing The Home Connect Software Update - Gaggenau RB 280 Serie Instrucciones De Uso

4. Open the app and wait until the refrigerator is
displayed.
Press Add to confirm the connection between the
app and the refrigerator.
If the refrigerator is not automatically displayed,
click on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
5. Follow the instructions in the app until the
process is complete.
The temperature display refrigerator
compartment 8 indicates PA and the temperature
display freezer compartment 4 indicates On.
The refrigerator has been connected to the app.
If the connection has failed, please check
whether the mobile device is connected to the
home network (WLAN).
Then try to establish the connection again.
If the temperature display freezer compartment 4
indicates Er, reset the Home Connect settings.
Note:
When resetting, all Home Connect settings are
reset.
Verify signal strength
You should verify the signal strength if no connection
can be established.
1. Press the Home Connect button 6.
The temperature display refrigerator
compartment 8 indicates Cn.
2. Press the refrigerator compartment temperature
selection button 7 until the temperature display
refrigerator compartment 8 indicates SI. The
temperature display freezer compartment 4
indicates a value between 0 (no reception) and
3 (full reception).
The signal strength should be at least 2. If the
signal strength is too weak, the connection may
be interrupted.
▯
Place the router and refrigerator closer
together.
▯
Ensure that the connection do not interfere
with by screening walls.
▯
Alternatively, install a repeater to make the
signal stronger.
Resetting Home Connect settings
If there is a problem when trying to establish a
connection or if you want to register the appliance in a
different home network (WLAN), the Home Connect
settings can be reset:
1. Press the Home Connect button 6.
The temperature display refrigerator
compartment 8 indicates Cn.
2. Press the refrigerator compartment temperature
selection button 7 until the temperature display
refrigerator compartment 8 indicates rE and the
temperature display freezer compartment 4
indicates OF.
3. Press the freezer compartment temperature
selection button 3.
The temperature display freezer compartment 4
displays an animation for 15 seconds.
Then the temperature display freezer
compartment 4 indicates OF.
The Home Connect settings have been reset.
Installing the Home Connect
software update
The refrigerator checks for updates to the Home
Connect software at regular intervals.
When an update is available, the temperature display
refrigerator compartment 8 indicates UP.
Press any button to reset the display to the set
temperature.
Installing the update:
1. Press the Home Connect button 6.
The temperature display refrigerator
compartment 8 indicates Cn.
2. Press the refrigerator compartment temperature
selection button 7 until the temperature display
refrigerator compartment 8 indicates UP and the
temperature display freezer compartment 4
indicates OF.
3. Press the freezer compartment temperature
selection button 3.
The temperature display freezer compartment 4
displays an animation.
The update is installed.
During the installation, all buttons are locked.
▯
If the installation was successful, the
temperature display freezer compartment 4
indicates On.
▯
If installation was not successful, the
temperature display freezer compartment 4
indicates Er. Start the update again at a later
time. If the installation has still not been
successfully completed after several attempts,
inform customer Service.
13