English; Technical Data; Defi Nitions: Safety Guidelines - DeWalt DC411 Manual De Instrucciones

E NGLIS H
HEAVY-DUTY CORDLESS GRINDER DC411
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical data

Voltage V
DC
Power W
No-load min -1
Wheel diameter mm
Spindle diameter
Weight (without
battery pack) kg
* weight includes side handle and guard
L (sound pressure) dB(A)
pA
K (sound pressure
pA
uncertainty) dB(A)
L (acoustic power) dB(A)
WA
K (acoustic power
WA
uncertainty) dB(A)
Vibration total values (triax vector sum) determined according
to EN 60745:
Weighted RMS
acceleration value m/s 2
Uncertainty K
m/s 2
Battery pack DE9096 DE9503 DE9180
Battery type NiCD
Voltage V 18
DC
Capacity Ah 2.4
Weight kg 1.0
Charger DE9116
Mains voltage V
AC
Battery type NiCd/NiMH
Approx. charging time min 60 (2.0 Ah
battery packs)
Weight kg
36
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
DC411
18
405
6,500
125
M14
2.2*
83
3.0
94
3.0
Fuses:
Europe
U.K. & Ireland
Defi nitions: Safety Guidelines
7.5
The definitions below describe the level of severity
3.3
for each signal word. Please read the manual and
pay attention to these symbols.
NiMH Li-Ion
18 18
2.6 2.0
1.0 0.68
DE9135
230 230
NiCd/NiMH/Li-Ion
40 (2.0 Ah
battery packs)
0.4 0.52
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
DANGER: Indicates an imminently
hazardous situation which, if not
avoided, will result in death or
serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.