Working As Intercommunication Central; Answer A Call From Secondary Telephone; Call To A Secondary Telephone - Fermax CityMax ADS Extra Manual De Instrucciones

Working as Intercommunication Central

A special application of the ADS guard unit is to work as an Intercommunication
manager for a Radial ADS Intercom System, using exclusively the functions of
making and receiving calls to and from the secondary telephones connected in the
system.
As it happened when acting as guard unit, everytime the guard unit receives a call it
starts to emit a series of "bips" constantly. The call is then stored in the so called
STACK of calls, allowing the guard to answer immediately (as explained on this
page) or later on (as explained in the next page).
Depending on the Operating Mode selectd (see page 4), the intercom central will
operates as follows:
DAY MODE or AUTOMATIC MODE: It can make and receive calls from secondary
telephones.
NIGHT MODE: It can make calls to the secondary telephones but it does not receive
calls.
OFF MODE: The intercom system is disconneceted, therefore it is not possible to
make or receive calls.
The operation as intercom system is as follows:

Answer a call from secondary telephone

* The indicator attached to the button flashes
ó)
shortly.
* In the SECTION D of the display are shown
the data of the call.
Example: call from telephone nº 156.
* To answer the call, pick-up the handset and
press the
The data about the communication in progress
will be shown in the SECTION D.
Example: communication with telephone nº156.

Call to a secondary telephone

* Pick-up the handset and dial the number of the telephone to be called.
* Press the "BELL" key.
* In the SECTION D of the display are shown
the data of the call in progress.
Example: communication with telephone nº
108.
Pag 34
key.
156/Po
[Po/ 156]
[Po/ 108]