GE 25835 Guia Del Usuario página 16

7. Press CALLER ID-VOL (- or +) button to select the specific VIP melody
memory location (10 VIP locations) that does not contain any record.
8. Press MUTE/PROG button to display SELECT MEMORY.
NOTE: If the memory location does not contain any CID memory records
and you are trying to mark a specific record as VIP MELODY, then "SELECT
MEMORY" will not be displayed. Instead, "NO USER MEMORY" will display in
prompt to alert the user.
9. Press CALLER ID-VOL (- or +) button to view the records from memory
to be selected as VIP .
10. Press MUTE/PROG button to confirm and then display VIP MELODY 01
to wait for the melody tone selection.
11. Press CALLER ID-VOL (- or +) button to select from melody 01 to melody
10 (a testing tone is generated while making melody selection)
12. Press MUTE/PROG button to confirm.
NOTE: If the desired number/record was previously stored in any one of the ten
VIP melody records, "DUPLICATE NUMBER" shows in the display.
Changing a Stored VIP Melody Record
Use the StoringVIP Melody procedure to change the number of a selected
record and replace the old phone number with new phone number.
When REPLACE VIP# ? shows in the display, you must press MUTE/PROG
button on the handset to confirm replacement.
Reviewing And Deleting Stored VIP Melody Record
1. Press the MUTE/PROG button to enter to VIP MELODY menu.
2. Use the CALLER ID-VOL (- or +) button to scroll to the desired VIP
Melody Record.
3. If you want to delete the information, press the DELETE button on the
handset while the entry displays.The display show DELETE VIP# ?.
4. Press DELETE again to confirm.You will hear a confirmation tone and
VIP# DELETED show in the display.
16