Calls; Handset; Number Redial - GE 25835 Guia Del Usuario

• To switch between the two calls, press the FLASH button.
TIP: Do not press the TALK/CALLBACK button on the handset to activate a
custom calling service, such as call waiting, or call will disconnect.
Last Number Redial
You may redial a number up to 32 digits long.
To quickly redial the last number you dialed:
1. Press theTALK/CALLBACK button.
2. Press the REDIAL button.
-OR-
3. Press the REDIAL button first, then use the CALLER ID-VOL (- or +) button to
select the desired redial number.
- Press the CALLER ID-VOL (+) to review the oldest call and scroll toward the
most recent calls (higher numbers).
- Press the CALLER ID-VOL (-) to review the newest call and scroll to older
calls (lower numbers).
NOTE: You may choose from three last dialed numbers.
4. Press theTALK/CALLBACK button.The number dials automatically.
If you get a busy signal and want to keep dialing the number, press the REDIAL
button to quickly redial the number.
Exit
Press the *EXIT button to exit a menu function and return to the
standby screen.
Page
The page feature helps you locate a misplaced handset.To send and receive
pages, all handsets must be registered. If your handset is not registered, follow
the instructions in the Registration section of this manual.
Handset to Handset Paging
(This is only applicable with addition of Model 25832A optional handset.)
If handsets are respectively named as Handset 1 and Handset 2.
1. Make sure the phone is OFF (not in talk mode).
2. Press and release the INT button on a handset. PAGING EXTENSION?
22