Selecting a soundstage
menu
— Dynamic Soundstage Organizer (DSO)
If your speakers are installed into the lower
part of the doors, the sound will come from
below and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if
there were speakers in the dashboard (virtual
speakers).
Soundstage menu
Memory presets
Meaning
Virtual speakers (Standard)
DSO 1, 2, and 3
Virtual speakers (Wide)
Wide
Cancel
off
Image of virtual speakers
*
1
*
2
*
3
*
1
Standard
*
2
Wide
*
3
Acutual speakers position
*
(lower part of the front doors).
1
2
*
3
*
Selecting the DSO
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (DSO) repeatedly to select the
desired DSO mode.
Each time you press (DSO), the mode
changes as follows:
B 1
B 2
off b
To cancel the DSO mode, select "off."
After three seconds, the display returns to
the normal playback mode.
Adjusting the balance
(BAL)
You can adjust the sound balance from the left
and right speakers.
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (SOUND) repeatedly until "BAL"
appears.
3
Press either side of (SEEK/AMS) to adjust
the balance.
After three seconds, the display returns to
the normal playback mode.
B 3
B Wide
23