Locating A Disc By Name; List-Up; File Function Or An Md Unit) - Sony CDX-C8050X Manual De Instrucciones

Erasing the disc memo
1
Press (SOURCE) repeatedly to select
"CD."
2
Press (MODE) repeatedly to select the CD
unit.
3
Press (MENU), then press either side of
(DISC/PRST) repeatedly until "NameDel"
appears.
4
Press (ENTER).
5
Press either side of (DISC/PRST)
repeatedly to select the disc name you
want to erase.
6
Press (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (MENU) twice.
The unit returns to normal CD playback
mode.
Notes
• When a personalized label is erased, the original
CD TEXT information will appear in the display.
• When you erase all of the disc names, "No Data"
appears in step 5.
16

Locating a disc by name

— List-up (For a CD unit with the custom

file function or an MD unit)

You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 15).
1
Press (LIST).
The name assigned to the current disc
appears in the display.
When you assign a disc memo label to a CD
TEXT disc, it takes priority over the original
CD TEXT information.
2
Press either side of (DISC/PRST)
repeatedly until you find the desired
disc.
To locate
preceding discs
To locate
succeeding discs
3
Press (ENTER) to play the disc.
Notes
• After a disc name has been displayed for five
seconds, the display returns to normal playback
mode. To turn off the display, press (LIST).
• The track names are not displayed during MD or
CD TEXT disc playback.
• If there are no discs in the magazine, "NO Disc"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• If the disc information has not been read by the
unit, "?" appears in the display. To load a disc,
first press the number button, then choose the
disc that has not been loaded.
• Some letters cannot be displayed (during MD or
CD TEXT disc playback).