Using the rotary remote
You can use the rotary remote for all operations
except menu operations.
Basic operations
By pressing buttons
SOURCE button
MODE button
GB
By rotating the control
If the SEEK/AMS mode is set to "Item sel," you can select the desired station or disc
with SEEK/AMS when the list appears in the display (see page 63).
SEEK/AMS control
12
Getting started
Each time you press SOURCE, the source changes as
follows:
Tuner n CD n MD*
* When an MD unit is connected.
Pressing MODE changes the operation as follows:
• Tuner: FM n MW n LW n DAB*
• CD unit: CD1 n CD2 n ...
• MD unit: MD1 n MD2 n ...
* When an optional DAB tuner unit is connected.
Rotate the control momentarily and release it to:
•Locate the beginning of tracks when CD or MD is
selected.
•Automatically tune in a station when FM, MW, or LW is
selected. When a station is detected, the unit stops
searching.
•Automatically tune in a service when DAB is selected.
When a service is detected, the unit stops searching.
Keep the control rotated to:
•Locate a specific point on a track when CD or MD is
selected. Playback at normal speed resumes when you
release the control.
•Manually tune in a station when FM, MW, or LW is
selected. Release the control when the desired station is
located.