Using The Wireless Remote - Sony CDX-C90R Manual De Instrucciones

Using the wireless remote

Use the wireless remote to make the various menu settings. For your safety, unit
operations with the wireless remote should be done by a passenger. If you (the
driver) want to use the wireless remote, park your car in a safe location first before
performing any operations.
SOURCE (Source select) button
Each time you press the button, the
source switches as follows:
" Tuner
* Only when an optional unit is
connected
GB
D LABEL button
When DAB is selected,
press to turn the Dynamic
Label.
(Temporarily inoperable)
MENU button
Press to switch to a menu
display. The menu which
appears depends on the
current program source.
To return to the previous
display, press the button
again.
When the ACC position is set to "no," the unit cannot be operated with the
wireless remote unless SOURCE on the rotary remote or front panel is pressed, or a
CD is inserted to activate the unit first.
14
Getting started
" CD " MD*
MODE (band/unit select)
button
Each time you press the button,
the band or unit switches as
follows:
When the tuner is selected
* When an optional DAB tuner
When CD/MD is selected
SOURCE MODE
PTY
DSPL/PTY (display mode
D LABEL DSPL
change/Programme type
MENU LIST
selection) button
When playing a CD or MD,
press to display the disc title or
track title.
BACK ENTER
VO L
When the current disc or track
– +
has no title, "NO Disc Name
ATT SOUND
(NO Track Name) " appears in
the display.
OFF
When FM or DAB is selected,
press to activate the PTY search
function (see page 47).
Press and hold for two seconds
to switch to the function menu
which appears, depending on
the current source or setting
mode (see "9 Function
buttons" page 9).
To return to the previous
function menu, press and hold
the button again.
" FM " MW " LW
unit is connected.
" CD/MD1 " CD/MD2
CD/MD3... "
" DAB*