Specifications - Sony VPL-FX50 Manual De Instrucciones

Specifications

Specifications
Optical characteristics
Projection system 3 LCD panels, 1 lens, projection
system
LCD panel 1.3-inch TFT SONY LCD panel
with micro-lens array,
2,359,296 pixels
(1024 × 768 pixels × 3)
Lens Approx. 1.3 times power zoom/
focus lens
f 50.8 to 64.0 mm/F 1.7 to 2.0
Lamp 250 W UHP
Projection picture size
Range: 40 to 300 inches (diagonal
measure)
Light output ANSI lumen
Throwing distance 40-inch: 1490 to 1820 mm
60-inch: 2280 to 2780 mm
80-inch: 3060 to 3740 mm
100-inch: 3850 to 4700 mm
120-inch: 4630 to 5660 mm
150-inch: 5810 to 7100 mm
180-inch: 6990 to 8540 mm
200-inch: 7770 to 9500 mm
250-inch: 9740 to 11900 mm
300-inch: 11700 to 14300 mm
Electrical characteristics
Color system NTSC
PAL-M/PAL-N system,
switched automatically/manually
Resolution 750 horizontal TV lines (Video
input)
1024 × 768 pixels (RGB input)
Acceptable computer signals
fH: 15 to 91 kHz
fV: 43 to 85 Hz
.........................................................................................................................................................................................................
1) ANSI lumen is a measuring method of American National Standard IT 7.228.
34
(GB)
1)
3500 lm
3 3
(58 / to 71 / inches)
4 4
7 1
(89 / to 109 / inches)
8 2
1 3
(120 / to 147 / inches)
2 8
(151 5 / to 185 1 / inches)
8 8
3 7
(182 / to 222 / inches)
8 8
7 5
(228 / to 279 / inches)
8 8
1 3
(275 / to 336 / inches)
4 8
1
(306 to 374 / inches)
8
5 5
(383 / to 468 / inches)
8 8
3 1
(460 / to 563 / inches)
4 8
/PAL/SECAM/NTSC
3.58 4.43
Input/Output
VIDEO IN
VIDEO OUT
INPUT A
/
INPUT B
INPUT C
VIDEO: BNC type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type (male)
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst
0.286 Vp-p ±2 dB (NTSC)
(75 ohms terminated),
burst 0.3 Vp-p ±2 dB (PAL)
(75 ohms terminated)
VIDEO: Loop-through BNC type
Loop-through output from the
VIDEO IN connector
S VIDEO: Loop-through mini DIN
4-pin type (male)
Loop-through output from the S
VIDEO IN connector
Analog RGB/component: 5BNC
(female)
R/R-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
B/B-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
SYNC/HD:
Composite sync input: 1-5 Vp-p
high impedance, positive/
negative
Horizontal sync input: 1-5 Vp-p
high impedance, positive/
negative
VD:
Vertical sync input: 1-5 Vp-p
high impedance, positive/
negative
Digital/Analog RGB: DVI-I
(TMDS)
ETHER
10BASE-T/100BASE-TX
standard
PC CARD slot
PC card slot Type II