Adjusting the sound and
frequency of the equalizer
This unit can also control an optional equalizer
preamplifier.
This lets you add some effects to the sound
field of the currently selected source.
For details, refer to the instructions manual
supplied with the equalizer preamplifier.
Changing the line output
level
You can change the line output level if you
hear distortion or other noise.
When the optional equalizer preamplifier is
connected, you can set this function.
1
Press (SHIFT), then press (3) (SET UP)
until "L.out" appears.
2
Press (5) (n) to select the desired
setting "L.out Hi" or "L.out Lo."
3
Press (SHIFT).
24
With Optional Equipment
CD/MD Unit
This unit can control a maximum of seven
external CD/MD units in this configuration:
CD unit – maximum of five
MD unit – maximum of five
Any combination up to seven will work.
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a
CD TEXT disc.
Playing a CD or MD
1
Press (SOURCE) repeatedly to select the
CD or MD.
2
Press (MODE) until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Changing the display item
Each time you press (DSPL) during CD, CD
TEXT, or MD playback, the item changes as
follows:
Elapsed playback time
1
Disc name*
Track name*
Clock
1
If you have not labelled the disc or if there is no
*
disc name prerecorded on the MD,
"NO D.Name" appears in the display.
2
If you play a CD TEXT disc, the artist name
*
appears in the display after the disc name. (Only
for CD TEXT discs with the artist name.)
3
If the track name of a CD TEXT disc or MD is not
*
prerecorded, "NO T.Name" appears in the
display.
$
$
2
/Artist name*
$
3
$