Setting The Clock - Sony CDX-C7850R Manual De Instrucciones

Caution alarm
If you turn the ignition key switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds
(only when the POWER SELECT switch is set
to the A position).
TIR indicator
If you pull out the ignition key while the TIR
function is on, the TIR indicator flashes a few
times (only when the POWER SELECT switch
is set to the A position).
TIR indicator
For more information on the TIR function,
refer to "Recording the traffic announcements"
(page 18).

Setting the clock

The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
1
Press (SHIFT), then press (3) (SET UP)
repeatedly until "Clock" appears.
SET UP
1 Press (5) (n).
SET UP
The hour indication flashes.
2 Set the hour.
to go backward
to go forward
3 Press (5) (n).
SET UP
The minute indication flashs.
4 Set the minute.
to go backward
to go forward
SET UP
2
Press (SHIFT).
SET UP
The clock starts.
3
Press (SHIFT).
After the clock setting is complete, the
display return to normal playback mode.
Note
If the POWER SELECT switch on the bottom of the
unit is set to the B position, turn the power on
first, then set the clock.
7