LEXIBOOK NLC700i Manual De Instrucciones página 6

NLC700 / NLC800 User Manual
1. Selectors
CUT : Round-off mode
UP : Round-up mode
5/4 : Hafl-adjust mode
F : Floating mode
0 - 4 : Sets the specified decimal point.
ADD : 2 decimal places are assumed for entires and results of
2
all addition and subtraction operations. Entering 2 only
results in a value of 0.02 for the entry. If you use the
key during entry of a value, the decimal point is
included at the place you specify. This mode has no
effect on multiplication and division operation.
2. Functions
Add displayed amount in memory.
Substract displayed amount in memory.
Display memory content.
Press MRC twice to clear memory content.
Press
twice, the content of the GT memory will be cleared.
1. Addition or substraction with a percentage
Ex : 100 + 10% = 110
100 x 10 %
2. Percentage calculations
Ex : 100 x 10 % = 10
to display the GT memory. If the key is pressed
Type
+
Display
10
110
6