Publicidad
Note: The red 12 ga. wire is not used for this installation.
15. Reattach the vehicles Negative (-) battery wire.
16. Place the 10 amp fuse into the fuse holder installed in step 13.
17. Confirm trailer harness operation with a test light or by using a
trailer.
18. Secure all wires using cable ties (provided). The
T-Connectors black box should be secured behind the right
(passenger) side tail light housing.
19. Re-install both tail light assemblies using the fasteners removed in
step 2 taking care to align the locking clips into their respective holes.
Publicidad
