Before Installing The Appliance; Installation; Ambient Temperature; Before Placing Food In The Fridge Or Freezer Compartment - THOMSON CTH 122 Manual De Instrucciones

A Fridge compartment
1. Temperature control knob and light
2. Glass shelves
3. Vegetable container
4. Door shelf
5. Bottle shelf
6. Egg tray
B Freezer compartment
7. Top drawer
8. Middle drawer
9. Bottom drawer
10. Ice cube tray
11. Scraper

BEFORE INSTALLING THE APPLIANCE

Before connecting your appliance to the power supply, check that the voltage stated on the rating label
of your appliance corresponds to the voltage in your home.
Ensure that the plug remains accessible after installation.
The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a
result of usage without grounding.

INSTALLATION

Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to
direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of
the cabinet.
For uneven surfaces, front feet can be aligned.

AMBIENT TEMPERATURE

This appliance is designed to operate in ambient temperature between 16°C and 38°C (N/ST). If these
temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly. If the
ambient temperatures are exceeded for long periods, the temperature in the freezer compartment will
rise above -18℃ and food spoilage may occur.

BEFORE PLACING FOOD IN THE FRIDGE OR FREEZER COMPARTMENT

 Remove all packaging.
 Allow the appliance to run empty for 2 – 3 hours so each compartment can cool to the appropriate
temperature.
 Clean the inside of the appliance with warm water and a little liquid detergent to remove
manufacturing and transportation dust.
6