Executing The Slide Show Promptly - Sony VPD-MX10 Manual De Instrucciones

8
Select "Slide Show", then press the ENTER key.
9
Select each item, then press the ENTER key.
10
Set the item, then press the ENTER key.
Effect: set the effect when the slide is displayed.
Advan. Slids.: set the automatic or manual slide
Interval: set the period for which one slide is displayed. When "Advan.
11
Select "Execute", then press the ENTER key.
To execute the slide show
When the slide show setting is set to "Auto", the slide show starts
automatically. When you want to end the slide show, press the MS SLIDE or
ENTER key. When it is set to "Manual", press the following keys for the
slide show.
,/m: to display the next slide
</M: to display the previous slide
MS SLIDE/ENTER: to end the slide show
To return to the MS home before executing the slide show
Select "Return".

Executing the Slide Show Promptly

As the settings are memorized even if you change the input after the setting
of steps 1 to 10, press the MS SLIDE key on the Remote Commander just
as you start the presentation. The input is changed to MS and the slide show
starts promptly. To end the slide show, press the MS SLIDE or ENTER key
again.
16
GB
Sliding a Picture File of the JPEG Format — JPEG Viewer
EVENT
Select: JPEG Viewer
Slide Show
Index
Select Contents
DCIM
Slids." is set to "Manual", it does not work. The time is about right.
Execute
Return
Effect Off
Advan.Slds. Auto
Interval 5 sec