Switching The File Display Mode; Repeating The Slide Show; Executing The Slide Show Promptly - Sony Memory Stick VPL-CX6 Manual De Instrucciones

Switching the File Display Mode

You can display one picture file only (Normal mode) or thumbnails of
picture files (Thumbnail mode).
1 Select "Index Display" in the MS Home, then press the ENTER key.
2 Select the setting, then press the ENTER key.
Normal: to display a picture file
Thumbnail: to display thumbnails of the picture files contained in the
selected contents.

Repeating the Slide Show

1 Select "Slide Show" in the MS Home, then press the ENTER key.
2 Select "Repeat," then press the ENTER key.
On: set to execute the slide show repeatedly
Off: set to execute the slide show one time only
To execute the slide show
When the slide show setting is set to "Auto" by the Projector Station for
Presentation, the slide show is executed according to the settings made by the
Projector Station for Presentation. When you want to end the slide show,
press the MS SLIDE or ENTER key. When the slide show setting is set to
"Manual", press the following keys for the slide show.
,: to display the next slide
<: to display the previous slide
MS SLIDE: to end the slide show
To return to the MS Home before executing the slide show
Select "Close" to return to the MS Home before executing the slide show in
Step 6 of "Sliding Material for a Presentation."

Executing the Slide Show Promptly

As the settings are memorized even if you change the input after the setting
of steps 1 to 5 of "Sliding Material for a Presentation — Presentation
Viewer", press the MS SLIDE key on the Remote Commander just as you
start the presentation. The input is changed to MS and the slide show starts
promptly. To end the slide show, press the MS SLIDE or ENTER key when
the slide show setting is "Auto", or press the MS SLIDE key when the slide
show setting is "Manual".
12
GB
Sliding Material for a Presentation — Presentation Viewer