Taurus MERCUCIO Manual De Instrucciones página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
English
CM850X
MERCUCIO
USE AND CARE:
- Do not use the appliance if its accessories are
not properly fitted.
- Do not switch the appliance on without water.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Respect the MAX and MIN levels.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Unplug the appliance from the mains before
refilling the water tank.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Do not store the appliance if it is still hot.
- Only use water with the appliance.
- The use of bottled mineral water adapted for
human consumption is recommended.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not remove the filter holder when coffee is
being made, as at that time it is under pressure.
DESCRIPTION
A Supply cable
B Water tank
C Water Tank Lid
D Hot plate for warming cups
E Control panel
F ON/OFF Button
G1 One Coffee Button
G2 Two Coffee Button
H Steam heating Button
I Steamer pipe
J Filter holder
K Measuring spoon
L Ground coffee filter (1 cup)
M Ground coffee filter (2 cups)
N Drip tray level
O Drip tray
P Tray grill
R Steam knob
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Before using this product for the first time, it is
advisable to test it only with water.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
- Before connecting the machine, check that the
steam control (R) is closed by turning clock-
wise.
PRIMING THE CIRCUIT:
- This simple operation ensures optimum dispen-
sing and must be carried out:
- When first starting:
- When the machine has been out of use for a
long time (1 or 2 weeks)
- After making steam
- When the tank has run out of water.
- Fill the receptacle taking care to observe the
MAX level
- Connect the appliance to the mains.
- Press the on/off button (F) Power indicator is
illuminated.
- The indicators of 1 cup of coffee and 2 cup of
coffee flash, the machine begins heating, after
all indicators are solidly ON. The preheating is
completed
- Without fitting the filter holder (or with the filter
holder fitted, but without coffee), place a reci-
pient under the steam pipe (I)
- Open the steam knob (R) by turning counterc-
lockwise
- Press the G2 Coffee Button.
- Water will exit through the steam pipe. Wait
until approximately one cupful has exited
- First time you will use the machine, there is no
water on the boiler, so it could be possible you
need to repeat this operation before getting
water

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido