Programming - Philips SPIDEM TREVI DITIAL RS AAC SUP018MDR Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 78
34
r i n s i n g
f i n i s h e d
the knob (6).
• At the end of the descaling operation,
exit the program by pressing the
“MENU/OK” key.
The message
appear.
E
Note: the duration of the
descaling and rinse cycle is about
40 minutes.
E
Important: regular descaling
of the machine protects it
from damage that may be costly to
repair.
The warranty does not cover any faults
caused by failure to descale the
machine, improper use or non-
compliance with the operating
instructions.

10 PROGRAMMING

10.1
MENU/OK key
To switch over to the programming mode,
press the “MENU/OK” key when the
machine is ready for use. To select the
function desired, press ∧ ∧ ∧ ∧ ∧ to go up or ∨ ∨ ∨ ∨ ∨ to
go down one item in the display.
To exit programming, press “ESC”
10.2
Selecting individual functions
Select the function desired with the ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨
key. Activate the function desired with the
“MENU/OK” key; use the ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨ key to
go through the variables that may be
selected; press “MENU/OK”to memorize
the variable selected.
E
Note: by pressing “ESC“ you may
interrupt programming at any
time without memorizing the changes;
is displayed. Close
w a r m i n g
u p
will
Descaling - Programming
to memorize changes you must first
press the “MENU/OK”key.
10.3
Description of programmable
functions
ENERGY SAVING
When the machine is used infrequently, it
may be switched over into the standby
position. This function allows you to save
on energy costs. However, we recommend
turning off the machine completely by
pressing the main switch (16) if it is to
remain out of use for a long time. When
the machine is turned back on, it only takes
two minutes to heat up.
• Press the “MENU/OK” key. Select the
E N E R G Y
S A V I N G
∨ ∨ ∨ ∨ ∨ key and activate it with the “MENU/
OK” key; the word
be
displayed.
E N E R G Y
S A V I N G
“MENU/OK” key.
RINSING
Immediately after being turned on, the
machine automatically eliminates the
residual water left in the circuit so as to ensure
that the coffee will be made with fresh water
r i n s i n g
only. The
o n
already programmed by the manufacturer.
• To disable this function, press the
“MENU/OK” key. Use the ∧ ∧ ∧ ∧ ∧ or ∨ ∨ ∨ ∨ ∨ key to
r i n s i n g
select the
activate it with the “MENU/OK” key. The
r i n s i n g
words
o f f
function with the ∧ ∧ ∧ ∧ ∧ or
E N E R G Y
S A V I N G
will
To
disable
the
function, press the
function is
function and
or

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

741453207741453007Spidem trevi digital rs sil ss sup018mdr10001261

Tabla de contenido