Kit Preparation; Kit Assembly - Metra 95-7344 Manual Del Usuario

Kit Preparation

1. Install the hazard button and display previously removed from the factory
radio panel.
2. Attach the four included panel clips to the radio panel. (Figure A)
Continue to kit assembly
White
plastic
clips
(Figure A)
95-7344
ISO DDIN radio provision
1. Secure the radio to the radio brackets
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
and/or AXXESS. Test the radio for
proper operation.
White
3. Mount the completed assembly into
plastic
clips
the dash. (Figure B)
4. Connect all connectors to the display
and hazard, snap the radio trim plate
over the completed assembly, and
then reassemble the dash in reverse
order of disassembly. (Figure C)
(Figure A)
3

Kit Assembly

(Figure B)
(Figure C)