Kit Preparation - Metra 99-6538B Instrucciones De Instalación

1. Remove the (4) T-15 Torx screws securing
the hazard/switch panel to the factory
radio trim panel. (Figure A)
2. Remove the (2) T-15 Torx screws securing
each a/c vent to the factory radio trim
panel. (Figure A)
3. Attach the hazard/switch panel to the
radio trim panel with keypad using the
(4) #8 x 3/8" Phillips screws provided.
(Figure B)
4. Attach the a/c vents to the radio trim
panel with keypad using the
(4) #8 x 3/8" Phillips screws provided.
(Figure B)
5. Attach the (9) plastic panel clips to the
radio trim panel with keypad.
Continue to Kit Assembly

KIT PREPARATION

(Figure A)
(Figure B)
3
REV. 8/16/2017 INST99-6538B