Suntec Wellness Klimatronic Heat Safe 1000 PTC-Turbo Manual De Instrucciones página 14

Installation
•
Components:
•
Installation of radiator feet:
Turn the appliance upside down on a carpet or similar
surface to prevent damage to the paint and your floor.
The wheel base will now be connected to the utmost
radiator fin with help of the u-shaped bolt. Place the
u-shaped bolt with its open end under the radiator fin.
The radiator should be surrounded by the wheel base
on top and by the u-shaped bolt from the bottom.
A: Radiator fin
B: Handle
C: Thermostat control (min – max)
D: Power rotary switch
E: Time switch
F: Turbo fan
G: Power cord storage
H: Wheels
I: Radiator foot
Note: For the models Heat Safe 1000 and 1500
PTC-Turbo, the wheels must first be attached
to the bolts of the radiator feet with a lot of force
until they lock with a "click" sound.
Please insert the angled end of the u-shaped
bolt into the utmost left hole of the wheel base.
Hold both parts tight.
Put the open end of the u-shaped bolt through
the utmost right hole of the wheel base and
screw it tight from the top.