Installing and Removing the Battery and Card
Removing the Battery and Card
20
Turn off the power
1
Open the cover.
2
Make sure the access lamp is off,
then open the cover.
If [Recording...] is displayed, close
the cover.
Remove the battery.
3
Press the battery lock lever as shown
by the arrow and remove the battery.
To prevent short circuiting of the
electrical contacts, be sure to attach
the provided protective cover (p.18)
to the battery.
Remove the card.
4
Gently push in the card, then let it go
to eject.
Pull the card straight out.
Close the cover.
5
Press the cover until it snaps shut.
.
(p.21)