Barrette VERANDA 34107834 Instrucciones De Instalación página 7

9.
Install Gravity Latch:
Orient the latch at desired height on gate/post.
Latch should be on same side of gate, opposite of
hinges.
a. Once hinges are installed and gate is aligned,
mark pilot holes for latch on post and gate
through screw holes. Then drill using
b. Measure and install latch with six (6) 1" Phillips
screws as provided with the latch. The latch striker
is installed on the gate first and then install the
latch catch onto the gate post (Fig. 20).
Latch Catch
⁄ " bit.
3
32
Gate Post
Fig. 20
Latch Striker
Gate
7