Mounting; Electrical Installation - SICK GRTE18V Instrucciones De Operación

4
OPERATING AND STATUS INDICATORS
5

Mounting

6

Electrical installation

6
–
+
Figure 1: Operating element: Sensing range
Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐
sories).
max. 90 Nm
Note the sensor's maximum permissible tightening torque of 90 Nm.
The sensors must be connected in a voltage-free state (U
tion must be observed, depending on the connection type:
– Male connector connection: pin assignment
– Cable: wire color
Only apply voltage/switch on the voltage supply (U
tions have been established. The green LED indicator lights up on the sensor.
Explanations of the connection diagram (following tables):
Q / Q = switching outputs
n. c. = not connected
= 0 V). The following informa‐
V
> 0 V) once all electrical connec‐
V
8021181.1ABM / 2020-12-21 | SICK
Subject to change without notice