Adjustment - SICK GRTE18 Instrucciones De Operación

4.5

Adjustment

8016953.1ABM / 2020-12-21 | SICK
Subject to change without notice
Figure: F
Sensor with potentiometer:
The sensitivity (sensing range) is adjusted with the potentiometer (type: 270°). Clock‐
wise rotation: sensitivity (sensing range) increased; counterclockwise rotation: sensitiv‐
ity (sensing range) reduced. We recommend placing the switching state in the object, e.
g., see graphic F. Once the sensitivity has been adjusted, the object is removed from the
path of the beam. The switching output changes (see graphic C).
The sensor is adjusted and ready for operation. Refer to graphics C and G to check the
function. If the switching output fails to behave in accordance with graphic C, check
application conditions. See section Fault diagnosis.
(PNP)
1
q
0
1
Q 0
(NPN)
1
0
q
1
Q
0
Figure: C
4
COMMISSIONING
9