Epson IR-320 Manual Del Usuario página 14

English
™
CompactFlash is a trademark of SanDisk Corporation.
® ®
IBM , PC/AT , and PS/2
the United States, other countries, or both.
®
CHIPS is registered trademark of Intel Corporation.
®
Sound Blaster is a registered trademark of Creative Technology Ltd. In the United States, other countries, or both.
™
BaySwap is a trademark of Phoenix Technologies Ltd.
General Notice: Other product and company names used herein are for identification purposes only and may be
trademarks of their respective companies.
NOTICE: The contents of this manual are subject to change without notice. Please contact us for the latest information.
Copyright © 2003 by Seiko Epson Corporation, Nagano, Japan.
EMC and Safety Standards Applied
Product Name: IM-320
Model Name: M156X
The following standards are applied only to the units that
are so labeled.
Europe: CE marking
North America: EMI:
Safety: UL 1950-3rd/ CSA C22.2
Japan: EMC:
Oceania: EMC:
WARNING
The connection of a non-shielded printer interface cable to
this device will invalidate the EMC standards of this device.
You are cautioned that changes or modifications not
expressly approved by SEIKO EPSON Corporation could
void your authority to operate the equipment.
UL1950
AC Cord:
Detachable, maximum 4.5 m (14.76 ft) long.
Listed, CN, rated minimum 125 V, 7A, having a
Type SPT-2, SVT or SJT flexible cord.
One end terminates with a parallel blade, grounding,
molded-on, attachment plug with a 15 A, 125 V
(NEMA 5-15P) for 100-120 V input, 15 A, 250 V
(NEMA 6-15P) for 200-240 V input configuration;
other end terminates with molded-on appliance
coupler.
2 IR-320 User's Manual
®
are registered trademarks or trademarks of International Business Machines Corporation in
FCC/ICES-003 Class A
No. 950-95
VCCI Class A
AS/NZS 3548 Class A
CE Marking
The unit conforms to the following Directives and Norms:
Directive 89/336/EEC EN 55022 Class A
EN 55024
EN 61000-3-2
EN 61000-3-3
Directive 73/23/EEC Safety: EN 60950
WARNING
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
CAUTION:
Connecting an outdoor overhead LAN cable directly
to your product may lead to lightning damage. If you
need to connect such a cable to your product, the
cable must be protected against an electrical surge
between the cable and your product. You should
avoid connecting your product to a non-surge
protected outdoor overhead LAN cable.
FCC Compliance Statement For
American Users
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be
required to correct the interference at his own expense.
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-11