Charging The Battery - Epson IR-320 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 93
English
Notes on Using the Product for the First Time
If you use the product for the first time or have not used it for a long
time, please note the following:

Charging the Battery

Before using the product, if the optional battery unit OI-R03 is installed,
be sure to fully charge the battery unit.To fully charge the battery unit,
leave the IR-320 with the power turned on for approximately 32 hours.
Notes on Installing a Commercially Purchased
Windows 2000 or Windows XP
When installing a commercially purchased Windows 2000 or
Windows XP, nothing will be displayed in the middle of the setup.
Follow the procedures below to install commercially purchased
Windows.
Windows 2000
1. Connect the keyboard and mouse to the IR-320.
2. Start up from the Windows 2000 CD-ROM.
3. The setup wizard is started and the welcome message appears.
4. Press the Enter key to execute "To set up Windows 2000 now."
5. The "License Agreement" appears. Confirm it and press the F8 key
to select "I agree."
6. Follow the wizard to format the hard disk on which you are going
to install Windows 2000.
7. When you finish copying files to the hard disk, restart from the
hard disk.
8. When the "Regional Settings" dialog box appears, press the
SHIFT + F10 keys to start the command prompt.
9. Remove the Windows 2000 CD-ROM, and insert the driver
CD-ROM for the IR-320.
10. Execute the win2k_xpe67.exe file, which is in the
D:\WIN2K\VIDEO folder.
11. Install the video driver, following the wizards.
12. When the setup is complete, the dialog box that instructs you to
restart appears. Press "No, I will restart my computer later." and
then press the Finish button.
13. Enter "Exit" at the command prompt to exit.
14. Remove the driver CD-ROM for the IR-320 and then insert the
Windows 2000 CD-ROM.
6 IR-320 User's Manual

Publicidad

Tabla de contenido
loading

Tabla de contenido