Epson IR-320 Manual Del Usuario página 23

Key Lock Keys
A set of 5 Key Lock keys is provided. Each key allows the user to access
the function level you define for that key position. The Key Lock keys
are used by inserting them into the lock on top of the IR-320, as shown
in illustration I.
The Key Lock keys place restrictions on the functions that can be used by
the operator. The Key Lock key can be turned to 6 positions (from 1 to 6).
Each key can be given a different access range to prevent use of higher
functions by unauthorized users.
Inserting and Removing a Floppy Disk
Insert the floppy disk with the label side up in the floppy disk drive.
When the floppy disk is inserted correctly, the eject button pops out.
To remove a floppy disk, make sure the access LED of the floppy disk
drive is off. Then press the eject button, as shown in illustration J.
Take out the floppy disk carefully.
Inserting and Removing a CD-ROM/R/RW
1. Press the eject button of the CD-ROM, CD-R/RW drive; the tray
comes out.
2. Put the CD-ROM/R/RW with the label side up in the tray.
CAUTION:
Push the CD-ROM/R/RW down slightly to ensure that it is firmly set in
the tray. Otherwise the CD-ROM/R/RW may be damaged.
3. Gently push the tray into the CD-ROM, CD-R/RW drive, as
shown in illustration K.
To remove a CD-ROM/R/RW, follow these steps.
1. Check that the CD-ROM LED is off.
2. Press the eject button; the tray comes out slightly.
3. Pull the tray out fully, and remove the CD-ROM/R/RW carefully.
IR-320 User's Manual 11
English