Windows Xp - Epson IR-320 Manual Del Usuario

15. You will be taken back to the Windows 2000 setup screen. Follow
the onscreen instructions to enter the necessary information.
16. When the setup is complete, the dialog box that instructs you to
restart appears. Press the Finish button to restart.
17. The "Network Identification Wizard" starts. Press the Next button
to execute it.
18. Set a password and press the Next button.
19. Press the Finish button to exit the "Network Identification Wizard."
20. Install the Chipset driver, network driver, touch panel driver, and
sound driver from the driver CD-ROM for the IR-320.

Windows XP

1. Connect the keyboard and mouse to the IR-320.
2. Start up from the Windows XP CD-ROM.
3. The setup wizard is started and the welcome message appears.
4. Press the Enter key to execute "To set up Windows XP now."
5. The "License Agreement" appears. Confirm it and press the
F8 key to select "I agree."
6. Follow the wizard to format the hard disk on which you are going
to install Windows XP.
7. When you finish copying files to the hard disk, restart from the
hard disk.
8. When the "Regional and Language Options" dialog box appears,
press the SHIFT + F10 keys to get the command prompt.
9. Remove the Windows XP CD-ROM and then insert the driver
CD-ROM for the IR-320.
10. Execute the win2k_xpe67.exe file, which is in the
D:\WINXP\VIDEO folder.
11. Install the video driver, following the wizards.
12. When the setup is complete, the dialog box that instructs you to
restart appears. Press "No, I will restart my computer later." and
then press the Finish button.
13. Enter "Exit" at the command prompt to exit.
14. Remove the driver CD-ROM for the IR-320 and then insert the
Windows XP CD-ROM.
15. Follow the onscreen instructions to enter the necessary
information.
16. When the installation is finished, the system will restart.
17. Install the Chipset driver, network driver, and touch panel driver
from the driver CD-ROM for the IR-320.
English
IR-320 User's Manual 7