Instructions For Work; Cleaning - Redstone YT-TZR-200/400 Manual De Instrucciones

INSTRUCTIONS FOR WORK

B - Incorrect cable winding may damaging it.
D1 - Observe a radius of one meter around the load carried.
Warning! Stay away from moving parts.
D2a / 2b - Fixing the hoist on your media needs to be a structure of study!
D3a / 3b - Only a mobile structure allows to pull the cord to start the rotation of the load and hoist holder.
D4a / 4b / 4c - The cable must always work to applomb the hoist drum, no recovery by the use of a second pulley
is permitted.. The hoist must always be set at the highest point.
!
This device is not intended for use by persons (including children) whose physical, sensory or mental capabilities,
or lack of experience or knowledge, unless they have been given by via a person responsible for their safety, of
supervision or instruction concerning use of the appliance.
It should supervise children to ensure they do not play with the appliance.

CLEANING

C - Check regularly that the steel cable is in good condition. Otherwise, have the cable replaced by a qualified
person.
Do control this unit by an authorized body every six months
!
Warning ! The machine you have bought is intended for private use.
However, if it was used in the workplace by employees, it is for the contractor to ensure
that it complies with the requirements of the Labour Code applicable to it.
YT-TZR-200/400
682000-2-Manual-C.indd 9 682000-2-Manual-C.indd 9
!
EN
9 9
24/07/2020 09:50 24/07/2020 09:50