Technical Data; Defi Nitions: Safety Guidelines - DeWalt D28715 Traducido De Las Instrucciones Originales

HEAVY-DUTY 355 mm (14") CHOP SAW WITH
QUICK-CHANGE CLAMP D28715
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Voltage V
(U.K. & Ireland only) V
Type
Power Input W
No-load speed min -1
Min. peripheral speed
cutting disc m/s
Disc diameter mm
Disc bore mm
Disc body thickness mm
Type of cutting disc straight,
non-recessed
Cross-cutting capacity at 90˚
circular mm
square mm
rectangular mm
angular mm
Cross-cutting capacity at 45˚
circular mm
square mm
rectangular mm
angular mm
Weight kg
L (sound pressure) dB(A)
PA
K (sound pressure
PA
uncertainty) dB(A)
L (sound power) dB(A)
WA
K (sound power
WA
uncertainty) dB(A)
Vibration total values (triax vector sum) determined according to
EN 61029-1 and prEN 61029-2-10:
Vibration emission value a
h
a = m/s²
h
Uncertainty K = m/s²
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
D28715 D28715LX
230 230
230/115 230/115
2 2
2,200 2,200
4,000 4,000
80 80
355 355
25.4 25.4
3.1 3.1
130
120 x 120
Fuses
100 x 200
Europe
140 x 140
U.K. & Ireland
U.K. & Ireland
130
110 x 110
Defi nitions: Safety Guidelines
100 x 140
The definitions below describe the level of severity
120 x 120
for each signal word. Please read the manual and
18.5 18.5
pay attention to these symbols.
100 98
3 3
112 111
3 3
6.2 5.3
1.5 1.5
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
EN GL IS H
25