Stanley FATMAX SFMCE530 Traducido De Las Instrucciones Originales página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
Wash hands, arms and face and
rinse mouth before eating or
drinking. Do not smoke or chew gum
or tobacco in the work area.
Clean up all removed paint and dust
u
by wet mopping the floors. Use a
wet cloth to clean all walls, sills and
any other surface where paint or
dust is clinging. DO NOT SWEEP,
DRY DUST OR VACUUM. Use a high
phosphate detergent or trisodium
phosphate (TSP) to wash and
mop areas.
At the end of each work session put
u
the paint chips and debris in a
double plastic bag, close it with
tape or twist ties and dispose
of properly.
Remove protective clothing and
u
work shoes in the work area to
avoid carrying dust into the rest of
the dwelling. Wash work clothes
separately. Wipe shoes off with a
wet rag that is then washed with the
work clothes.
Wash hair and body thoroughly with
soap and water.
Residual risks.
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc.
Even with the application of the relevant
safety regulations and the
implementation of safety devices, certain
residual risks can not be avoided.
(Original instructions)
These include:
Injuries caused by touching any
u
rotating/moving parts.
Injuries caused when changing any
u
parts, blades or accessories.
Injuries caused by prolonged use of a
u
tool. When using any tool for
prolonged periods ensure you take
regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing
u
dust developed when using your tool
(example:- working with wood,
especially oak, beech and MDF.)
Labels on tool
The following pictograms are shown on
the tool along with the date code:
:
Warning! Read all safety
warnings and all instructions.
Failure to follow the warnings
and instructions listed below
may result in electric shock, fire
and/or serious injury.
Switch the tool off. Before
performing any maintenance on
the tool, remove the battery from
the tool.
Additional safety instructions for
batteries and chargers
Batteries (Not Supplied)
Never attempt to open for any reason.
u
Do not expose the battery to water.
u
Do not store in locations where the
u
temperature may exceed 40 °C.
ENGLISH
9

Publicidad

Tabla de contenido
loading

Tabla de contenido