BATT E RY
CHARGE THE HEADPHONES
1. Connect the small end of the USB cable into the USB-C port on the
right earcup.
2. Connect the other end into a USB wall charger.
NOTES:
• When the headphones begin charging, the status light blinks white for 10 seconds.
When fully charged, the status light glows solid white.
• The headphones don't play while charging.
Charging time
Allow up to 2.5 hours to fully charge the headphones.
Hear the battery level
Each time you power on the headphones, a voice prompt announces the battery level.
When the headphone battery is low, you hear "Battery low, please charge now."
NOTE: To visually check the battery, see the status light l ocated on the right earcup.
For more information, see "Battery status" on page 29.
|
2 8
E N G