General Characteristics - Cembre B1320 Manual De Uso Y Mantenimiento

1. GENERAL CHARACTERISTICS

Application range
Rated crimping force
Minimum crimping force
Minimum operating pressure
Dimensions (Fig. 7 page 45)
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
(1)
Acoustic noise
Vibrations
(2)
Rechargeable battery
Weight
Battery Charger ASC30-36
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
(1)
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
Directive 2006/42/EC, annexe 1, point 2.2.1.1
(2)
Weighted root mean square in frequency of the acceleration the upper limbs are exposed to for each biodynamic
reference axis. Tests carried out in compliance with the indications contained in EN ISO 5349-1/2 and UNI EN 28662-1
Standards, and under operating conditions much more severe than those normally found.
5
suitable for installing electrical compression connectors
on conductors up to 400 mm
kN (US sh. ton)
kN (US sh. ton)
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from
a rapid advancing speed of the ram to a slower,
dB L
pA
m/s
2
type
V / Ah (Wh)
kg (lbs)
type
V / Hz (W)
132 (14.84)
125,2 (14.07)
692 (10,037)
404 x 239 x102.5 (15.9 x 9.4 x 4)
6,1 (13.4)
18
-15 a +50 (+5 a +122)
AGIP ARNICA 32 or equivalents.
more powerful crimping speed
maximum pressure valve
66,9 (A) L 86,9 (C)
pCPeak
0,398
CB1840L Li-Ion
18 / 4.0 (72)
0,66 (1.45)
EU 27044000
220 - 240 / 50 - 60 (85)
(800 MCM)
2
L 74,9 (A)
WA