Saivod SAP1220 Serie Manual Del Usuario página 124

Removing Collected Water
■ Drainage way as follows.
1. In Cool, Dry or Heat mode operating, the condensation water will be drained to the
chassis.
2. When the chassis is full with water, the buzzer will give out 8 sounds and "H8" is
displayed to remind user to discharge water,the unit will turned off about 2min latter,
and all buttons are invalid.
To empty the chassis, please follow the instructions bellow.
● Turn the unit off and unplug from the electrical outlet.
● Use a small pan or move the unit to a suitable place to drain the water.
● Take the drainage pipe from the clip and pull out the rubber plug on the drainage
pipe to drain the water.
● Drain the water into the small pan or a suitable place.
● Once draining is complete,re-install drain cap.
● Press ON/OFF button to restart the unit.