Watching Videos And Dvds - Panasonic TH-42PX6U Manual De Instrucciones

Watching TV
Change the aspect
(p. 36)
Change
aspect
ratio
■
FAVORITE
Call up
Channel numbers registered in Favorite are displayed on the favorite
a favorite
tune screen. Select the desired broadcast station with the cursor, or using
channel
number keys. (see below)
Note
•
Reselect "Cable" or "Antenna" in "ANT In" of "Auto program" to switch the signal reception between cable TV and
antenna. (p. 12)
•
The channel number and volume level remain the same even after the TV is turned off.
Set Favorite Feature
1
Display the channel to be placed on the Favorites list.
2
Hold down FAVORITE for several
seconds.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing ◄ ►
also changes the page.
Setting 1/3
[1]
[2]
[3]
[4]
[5]
3
Press ▲▼to highlight a position
select
on the list.
Then, press OK to memorize the
displayed CH in that position.
ok
• You can also use the NUMBER
keys (1-9 and 0) to select the
recorded list numbers (1-9 and
0). By doing so, the numbers
Setting 1/3
will be directly recorded without
[1] 26-1
having to press the OK key.
[2]
[3]
[4]
[5]
•
To delete a favorite channel
A memorized channel can be removed from the list by
holding down FAVORITE while its position is highlighted.
14
•
Each press changes the mode.
•
480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9) :
FULL, JUST, 4:3 or ZOOM
•
1080p / 1080i / 720p : FULL, H-FILL, JUST, 4:3 or
ZOOM.
Use Favorite Feature
1
Press FAVORITE.
• Press FAVORITE repeatedly
to change between pages (1/3,
2/3, 3/3, or exit). Pressing ◄ ►
also changes the page.
Favorite 1/3
[1]
[2]
[3]
[4]
[5]
2
Press ▲▼ or a Numbered key
select
(1-9 and 0) to highlight a channel
on the list.
• Selecting a channel number
from the list with the Number
keys will display the channel
directly.
3
Press OK to display the
ok
highlighted channel.

Watching Videos and DVDs

Some Panasonic equipment connected to the TV unit can be operated with the remote control.
Programming the remote control is necessary to operate other manufacturers' products. (p. 29)
With VCR or DVD turned On
1
Switch to external input
Press to display the Input select menu.
Select the input mode
2
Input select
[1] TV
[2] Component 1
[3] Component 2
[4] HDMI 1
[5] HDMI 2
- [6] Video 1
[7] Video 2
(Initial screen)
•
The terminal and label of the connected device is
indicated.
To label each of the connected devices (p. 26)
3
Operate
the VCR or DVD with the remote control
■
Press to return to
TV
Note
•
For details, see the
manual of the
equipment
or ask your local
dealer.
(For other operations, see p. 32.)
Press corresponding NUMBER
key on the Remote Control to
select the input of your choice.
or
Press to select the input of your
select
choice, then press "OK".
•
If during selection, no action
enter
is taken for several seconds,
the Input selection menu is
exited.
Label Terminal
Video 1
VCR
[example]
VCR DVD
VCR Record Record
- Open/Close
- Skip Reverse/Forward
Rewind/Fast Forward Reverse/Forward
Stop Stop
Pause Pause
Play Play
(example)
15